Loading ...
Loading ...
Loading ...
110
9-1.2 VLAN Configuration
The section describes the VLAN configuration setting process integrated with IGMP Snooping
function. For Each setting page shows up to 99 entries from the VLAN table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the VLAN Table. The first displayed will be the one
with the lowest VLAN ID found in the VLAN Table. The "VLAN" input fields allow the user to
select the starting point in the VLAN Table. Clicking the button will update the displayed table
starting from that or the next closest VLAN Table match.
Web Interface
To configure the IGMP Snooping VLAN Configuration in the web interface:
1. Click Multicast, IGMP Snooping and VLAN Configuration.
2. Click to add new IGMP VLAN.
3. Click the Apply to save the setting.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 9-1.2: The IGMP Snooping VLAN Configuration
Parameter description:
Start from Vlan :
You can click them Refreshes the displayed table starting from the "VLAN" input fields.
Delete :
Check to delete the entry. The designated entry will be deleted during the next save.
VLAN ID :
It displays the VLAN ID of the entry.
Snooping Enabled :
Enable the per-VLAN IGMP Snooping. Only up to 32 VLANs can be selected. .
IGMP Querier :
Loading ...
Loading ...
Loading ...