Loading ...
Loading ...
Loading ...
5.Menu Interpretation
54
⚫
The delta of both the Frequency/Time and the amplitude
between the two markers are displayed at the upper right of the
screen.
⚫ Two ways to enable a certain point as the reference:
a) Open a "Normal" marker and locate it onto a point and then
switch the marker type into "Delta", creating a new reference,
then you can modify the location of the delta point to achieve the
delta measurement.
b) Open a Delta Marker and place it onto a point, then reselect
the Delta menu to locate the marker you opened onto this points,
then you can modify the location of the delta point to achieve the
delta measurement.
5.14.5 [Off]
The marker information displayed on the screen and functions
based on the marker will be turned off and won’t show up again.
5.14.6 [All Off]
Turns off all the opened markers and the related functions. The
marker won’t show again.
5.14.7 [Marker Table On Off]
Turns on or off the display of all marker table.
5.15 【Marker→】
A soft menu associated with the marker function is popped out for
setting the other system parameters (such as Center frequency,
Reference level) by current marker readings. These menus relate
to the frequency of the spectrum analyzer, whether the sweep
width and marker are in normal or delta marker mode.
5.15.1 [Mkr->CF]
Sets the center frequency of the analyzer based on the frequency
Loading ...
Loading ...
Loading ...