Loading ...
Loading ...
Loading ...
5.Menu Interpretation
45
Select the tracking generator to be on or off.
5.11.2 [Output Level]
Set the output power of CW or TG source.
5.11.3 [Reference]
After enabling normalization, adjust the vertical position of trace on
the screen by adjusting the reference level value.
5.11.4 [Position]
After enabling normalization, adjust the vertical position of
normalized reference level on the screen by adjusting the
reference position.
Note:
⚫ It is similar to the function realized by normalized reference
level, which is at the bottom of the screen grid when it is 0% or
at the top of the screen grid when it is 100%.
⚫ The parameter can be changed via numeric buttons, knob, or
direction buttons.
5.11.5 [Do Normalize]
This soft menu is used to track the user's field calibration of the
source network measurements. After connecting the instrument's
RF output to the RF input, press the "normalized" soft menu and
the display shows a straight line on the 0dB scale.
Note: Disable normalization before the operation above.
5.11.6 [Normalize On Off]
This soft-menu is used to turn normalization on or off after
executing normalization.
Loading ...
Loading ...
Loading ...