Loading ...
Loading ...
Loading ...
5.Menu Interpretation
51
“difference pair” frequency standard. In particular, mark peak
search result with the difference frequency standard and the min.
search result with the reference frequency standard.
5.13.3[Next Peak]
Searches the peak whose amplitude is the closest to that of the
current peak. The peak is then identified with a marker. When this
key is pressed repeatedly, you can quickly find a lower peak.
5.13.4[Left Peak]
Searches the nearest peak located to the left side of the current
peak and meets the current peak and peak thresholds condition.
The peak is then identified with a marker.
5.13.5[Right Peak]
Searches the nearest peak located to the right side of the current
peak and meets the current peak and peak thresholds condition.
The peak is then identified with a marker.
5.13.6[Cont Peak On Off]
Set the peak search form, off by default. On mode will
automatically search for the peak.
5.13.7[Peak Setup ＞]
Enter peak setup interface.
5.13.7.1 [Peak Excursion]
Set Peak Excursion.
5.13.7.2[Peak Mode Max Min]
Set the search under max. or min. value mode.
5.13.7.3[Sort Freq Ampt]
Set the sorting of peak value list by frequency or amplitude..
5.13.7.4[Peak List On Off]
Enable or disable peak list. If the peak value list is enabled, all the
Loading ...
Loading ...
Loading ...