Loading ...
Loading ...
Loading ...
Camera Controls 85
Fig. 32: USER BITS screen
NOTICE
•
On HD-SDI out, the last two digits of the user bits contain the Variflag, therefore
the last two user bits cannot be set by the user.
•
User bits are not stored in user setup files. When loading a user setup file, they
are reset to 00:00:00:00.
•
Check user bits after changing the sensor mode.
13.1.4.2 INFO
STATUS Info
The STATUS INFO screen displays information about the current state of the camera
system. System state: Good means that all components in the ALEXA are functioning
normally. Other messages can contain error messages prefixed with E:, or warnings
prefixed with W:. For more information about error messages and warnings, see
"Warning and Error Messages" in the Appendix.
Press the SAVE TO SD button to save a system log to the SD card. This may take up
to one minute.
NOTICE
It is only necessary to save a system log if the camera experiences multiple error
messages or other abnormal behavior. The system log is not a human-readable file
and should be sent to an ARRI Camera Service center for analysis.
VERSION Info
Cam serial
no.
The serial number of the camera.
Loading ...
Loading ...
Loading ...