Loading ...
Loading ...
Loading ...
Connectors 45
NOTICE
•
Do not force any media into the slot or into the adapter in wrong orientation—
the contacts could be damaged.
•
Do not force the door closed if the media is not fully inserted.
Removing media:
When the camera is in ProRes recording mode, SxS PRO cards, CFast 2.0 cards
and SXR/XR Capture Drives do not have to be mounted or unmounted—they can
be inserted or removed whenever the camera is in STBY mode. If media is removed
during recording, only the last second of the current clip will be lost. All clips on the
media will remain accessible.
When the camera is in ARRIRAW recording mode, SXR/XR Capture Drives need to
be unloaded before they can be safely removed. Unloading is triggered automatically
when the door is opened and the SXR/XR Capture Drive is in standby. When the door
is already open, but the SXR/XR Capture Drive is still loaded, press the eject button
on the SXR/XR Capture Drive to trigger unloading. See "Explanation of LED States"
below for information about how the camera signals loading state. If media is removed
during recording, only the last five seconds of the current clip will be lost. All clips on
the media will remain accessible.
NOTICE
•
If the recording process is interrupted by power loss or media removal, transfer
all the data from the media and format it before using it again.
•
If the door is opened while an ARRIRAW recording is running, the recording is
stopped and the medium is unloaded.
Before removing any media, open the door by sliding the OPEN slider towards camera
back. Ensure the lock slider is in the (upper) unlocked position, otherwise the OPEN
slider will be blocked.
To remove an SXR/XR Capture Drive:
► Carefully pull the SXR/XR Capture Drive towards camera back, taking care not to
drop it accidentally.
To remove an SxS PRO card or CFast 2.0 card:
► Push the card inwards (towards camera front) until the lock disengages, then pull
the card out backwards, taking care to prevent the card from dropping out of the
adapter.
To remove an adapter:
► Carefully lift the two securing plastic lids that secure the adapter and pull it towards
camera back, taking care not to drop it accidentally.
CAUTION!
It is possible that SXR/XR Capture Drives will get hot to the touch during extended
operation and can cause pain or even burns if held for too long. It is advisable
to handle the drive for no more than three seconds, and to remove the drive
quickly and carefully. Allow it to cool before further handling and consider wearing
protective gloves.
Loading ...
Loading ...
Loading ...