Loading ...
Loading ...
Loading ...
114 Camera Controls
Network
The ALEXA provides two ways for accessing the camera via network: with a web
browser using the web remote, or with a third party software supporting the Camera
Access Protocol (CAP).
The Camera Access Protocol allows third party software to remotely manipulate the
currently active ARRI Look File 2 file. Changes to an ARRI Look File 2 file become
immediately effective on all image paths with processing configured to Look file. Third
party software can connect to the camera via Ethernet. A list of supported third party
software can be found on the ARRI ALEXA SXT web page.
Web remote read-on-
ly
Select to restrict network access to read-only mode.
When set to Off, the Web Remote will not function prop-
erly.
Camera Access Pro-
tocol
Select to switch remote access to the camera via the
Camera Access Protocol on or off.
CAP client name Shows the name of the currently connected client.
Shows 'NONE' if no client is connected, and 'NO NAME'
if the connected client has not transmitted its name.
CAP password Select to set the password for Camera Access Protocol
connections.
SD card
Format + prepare SD
card
Select to format the SD card and create the required
folder structure after confirmation.
Note: This erases all data present on the SD card.
Prepare SD card Select to create or complete the required folder struc-
ture on the SD card without erasing any data present on
the SD card.
Loading ...
Loading ...
Loading ...