Loading ...
Loading ...
Loading ...
Connectors 39
Camera left
Camera front
Fig. 14: Camera front
EVF connector
10.1 BAT
The BAT connector can be used to power the camera from an external power source
with cables KC-20S and KC-29S.
It is located at the back of the camera on the camera-right side.
10.2 RET SYNC IN
A return signal from another image source can be fed into the ALEXA’s RET connector
for displaying on EVF and/or MON OUT. The signal must be a 1920x1080 422 1.5G
single link according to SMPTE 274M and 292M. The output routing of the RET
in signal can be set in the Monitoring menu. The SYNC IN function has not been
implemented.
The connector is located at the back of the camera on the camera-right side.
Loading ...
Loading ...
Loading ...