Loading ...
Loading ...
Loading ...
3
Operation Panel and Function Introduction
The operation panel is divided into an LCD screen and a touch screen (select the
corresponding operation by physical comparison)
LCD screen operation and function introduction
1
）
Cleaning/Defrosting Button
：
In the standby state, the button is clicked to enter the cleaning state, the cleaning
indicator lights, the buzzer sounds short, the stirring motor runs, and the liquid crystal
display shows the current value of the current stirring motor. Press this button again to
enter the standby state.
Press and hold the button for 5 seconds, the defrosting function is turned on, the
cleaning icon flashes, and then the button is pressed, and the defrosting function is
turned off. (Only for models with this feature.)
2
）
Cooling Button
：
In the standby state, the button is clicked to enter the cooling state, the cooling
indicator light is on, the buzzer sounds short, the stirring motor, the compressor, and
the fan motor start, and the liquid crystal display displays the current value of the
current stirring motor. Press this button again to enter the standby state.
3
）
Puffing Button
：
In the standby state, press the “Puffing” button, the air pump indicator light is on,
and the air pump is not working; in the cleaning or cooling state, press the puffing
button, the air pump indicator light flashes, and the air pump starts. (Only for models
with this feature.)
4
）
Hardness Adjustment Setting Button
：
Press and hold “
△
” “
▽
” or for 1 second to enter the hardness parameter
setting state, then click this button to change the hardness value. The higher the
hardness value, the harder the ice cream; the lower the hardness value, the softer the
ice cream.
5
）
Fresh/Pre-cool Button
：
In the standby state, press the “preservation” button, the freshness indicator light
is on, the buzzer will beep once, the stirring motor, compressor, and fan motor will
start at a delay, and the liquid crystal display will display the current value of the
current stirring motor. Press this button again to enter the standby state. In the cooling
state, press this button to automatically enter the trough pre-cooling function after
cooling is completed (only for models with this function)
6）Timing / Clear Button
In the standby state, jog the button to enter the restart time setting state, and then click
the button to change the restart time setting value. Press and hold the button for 10
seconds to clear the number of cups.
7）The number of ice cream cups shows that each time ice cream is squeezed, the
number is automatically recorded.
CL1
Lack of material in the
left hopper
Loading ...
Loading ...
Loading ...