Loading ...
Loading ...
Loading ...
Saving energy
For additional information on saving power, see the Notices chapter.
Using Eco‑Mode
Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.
Note: See the table for the multiple settings that change when you select an Eco‑Mode setting.
Choose To
Energy Reduce energy use, especially when the printer is idle.
• Printer engine motors do not start until a job is ready to print. You may notice a short delay before
the first page is printed.
• The printer enters Power Saver mode after one minute of inactivity.
• When the printer enters Power Saver mode, the printer control panel display and the standard
exit bin lights are turned o.
Paper
• Enable the automatic duplex feature
• Turn o print log features.
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
O Use factory default settings for all settings associated with Eco‑Mode. This setting supports the
performance specifications for your printer.
To select an Eco‑Mode setting:
1 On the home screen, touch .
2 To uc h Settings.
3 Tou ch General Settings.
4 Tou ch Eco‑Mode.
5 Touch the arrows to select a setting.
6 Tou ch Submit.
Adjusting Power Saver
To save energy, you can decrease the number of minutes before the printer enters Power Saver mode.
Available settings range from 1–240 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2 Click Settings, and then click General Settings.
3 Click Timeouts.
Minimizing your printer's environmental impact 62
Loading ...
Loading ...
Loading ...