Loading ...
Loading ...
Loading ...
Menu item Description
Output Lighting
Standard Bin LED
Normal/Standby Mode
O
Dim
Bright
Power Saver
O
Dim
Bright
Sets the amount of light from the standard bin or an optional
output bin
Notes:
• Dim is the factory default setting if Eco‑Mode is set to
Energy or Energy/Paper.
• Bright is the factory default setting if Eco‑Mode is set to
O or Paper.
Web Page Refresh Rate
30–300
Specifies the number of seconds between Embedded Web
Server refreshes
Note: 120 seconds is the factory default setting.
Contact Name Specifies a contact name for the printer
Location Specifies the location of the printer
Note: The location will be stored on the Embedded Web
Server.
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
O
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control.
Single sounds three quick beeps.
• O is the factory default setting for Toner Alarm. O
means no alarm will sound.
Timeouts
Standby Mode
Disabled
2–240
Specifies the number of minutes of inactivity before the system
enters a lower power state
Note: 15 minutes is the factory default setting.
Timeouts
Power Saver Mode
Disabled
1–240
Specifies the number of minutes of inactivity before some
systems begin entering a minimum power state.
Notes:
• 30 minutes is the factory default setting.
• Power Saver does not interact with Standby Mode.
Timeouts
Screen Timeout
15–300
Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Understanding printer menus 127
Loading ...
Loading ...
Loading ...