Loading ...
Loading ...
Loading ...
Menu item Description
Print Recovery
Page Protect
On
O
Lets the printer successfully print a page that may not have
printed otherwise
Notes:
• O is the factory default setting. O prints a partial page
when there is not enough memory to print the whole
page.
• On sets the printer to process the whole page so that the
entire page prints.
Factory Defaults
Do Not Restore
Restore Now
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not
Restore keeps the user‑defined settings.
• Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored
in
flash
memory or on a printer hard disk are not
aected.
Flash Drive menu
Menu item Description
Copies
1–999
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Paper Source
Tray <x>
Manual Feeder
Sets a default paper source for all print jobs
Note: Tray 1 (standard tray) is the factory default setting.
Collate
O (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Controls whether the job prints on one side or both sides of the paper
Note: 1 sided is the factory default setting.
Staple
O
On
Specifies whether print jobs are stapled
Notes:
• This menu item is available only when the StapleSmart II Finisher is
installed.
•
O
is the factory default setting. Print jobs are not stapled.
Understanding printer menus 129
Loading ...
Loading ...
Loading ...