Loading ...
Loading ...
Loading ...
Menu item Description
Baud
1200
2400
4800
9600
19200
38400
57600
115200
138200
172800
230400
345600
Specifies the rate at which data can be received through the serial port
Notes:
• 9600 is the factory default setting.
• 138200, 172800, 230400, and 345600 baud rates are displayed only in
the Standard Serial menu. These settings do not appear in the Serial
Option or Serial Option 2 menus.
Data Bits
7
8
Specifies the number of data bits that are sent in each transmission frame
Note: 8 is the factory default setting.
Parity
Even
Odd
None
Ignore
Sets the parity for serial input and output data frames
Note: None is the factory default setting.
Honor DSR
On
O
Determines whether the printer uses the DSR Signal. DSR is a handshaking
signal used by most serial cables.
Notes:
•
O
is the factory default setting.
• The serial port uses DSR to distinguish data sent by the computer from
data created by electrical noise in the serial cable. The electrical noise
can cause stray characters to print. Select On to prevent stray characters
from printing.
• This menu item appears only if Serial RS‑232/RS‑422 is set to RS 232.
SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port. The range of possible
port numbers is 1‑65536.
Understanding printer menus 117
Loading ...
Loading ...
Loading ...