Akai AK-FL10AK-HPD8S 10kg Front Load Washing Machine and 8kg Heat Pump Dryer Pack

User Manual - Page 9

For AK-FL10AK-HPD8S.

PDF File Manual, 32 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
9
Installation
Important notes regarding installation
Do NOT install the appliance:
: behind a lockable door, sliding door or a door with a hinge on the opposite side of
the dryer, in such a way that a full opening of the tumble dryer door is restricted
: in a tight fitting cabinet, the appliance must not be built in
: in an area where it will be exposed to temperatures below freezing. At tempera-
tures around freezing point, the dryer may not be able to operate properly, and
there is a risk of damage if the condensate water is allowed to freeze in the pump,
hoses and/or water container
: in an area where it will be exposed to water or weather, which could cause
permanent damage
: in an area where gas or flammable substances are used
: near fire sources or heat sources, or where it is exposed to direct sunshine
: directly on top of a washing machine.
Ensure the dryer is unplugged from the power supply before installation. The plug
must be accessible after installation.
All electrical connections must be made by qualified personnel, and all instructions in
this manual as well as local safety regulations must be observed.
Exhaust air must not be discharged into a flue which is used for exhausting fumes
from appliances burning gas or other fuels.
Move cautiously when moving the dryer. Do not grasp any salient parts of the
machine. Do not attempt to lift it by the door.
After installation, check and ensure that the appliance is not sitting on or pressing
against its electrical supply cord or drain hose.
Freestanding, floor level installation
The room: Position the dryer on floor level, in a clean and dry, well ventilated area,
away from heat and direct sunlight. Dirt must not be allowed to build up in the area,
and air must be able to circulate freely all around the appliance. Do not obstruct any
air inlets or ventilation openings.
The floor: To keep vibration and noise to a minimum when the dryer is in use, make
sure the floor surface is firm, flat, dry and stable. Do not place the appliance on soft
material such as foam, plastic or carpet, as this could block the air intake. Do not
restrict the floor clearance through deep pile carpets, strips of wood or similar. This
might cause heat build-up, which could interfere with the operation of the appliance.
The area: For your convenience, we recommend you position the dryer near your
washing machine. Also ensure there is an appropriate electrical outlet nearby. Leave
sufficient room at the back of the appliance for air dissipation.
Loading ...
Loading ...
Loading ...