Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
19
Instructions (Cont.)
Step-by-step guide to using the dryer
(a) Loading
Open the door and load the dryer following the guidelines on page 15. The total
weight of the load to be dried depends on the program chosen. All maximum load
values are listed in Table 2 on page 16.
Close the door and ensure that no items are caught in the door.
(b) Selecting a program
Turn the Program dial to select the desired drying program. The Start/Pause light
starts flashing. If you do not press any buttons within the next 10 minutes, the
program selection will switch off.
(c) Selecting a program option
Depending on the program, you can add one of the speciality functions to
customise your drying program.
To select a program option, press the relevant option button (Dry Level, Anti-
Crease, Delay Start) after choosing the desired program and before depressing
the Start/Pause button. The corresponding indicator light comes on; it will
extinguish when you press the button again.
(d) Starting a program
Press the Start/Pause button to commence drying. The drum will start rotating.
(e) Pausing a program
To pause the drying process, press the Start/Pause button or open the door while
the program is running. When the machine is suspended, the Program dial and
buttons are invalid except for the Start/Pause, Anti-Crease and Mute Buzzer
buttons.
To restart the program, press the Start/Pause button once again.
(f) Modifying a program
To change a program which is running, first cancel it by turning the Program dial to
the OFF [ O ] position.
Then select the new program and then press the Start/Pause button.
(g) Cancelling a program
To cancel a program which is running, turn the Program dial to the OFF [ O ] position.
IMPORTANT: If the drying program has to be stopped before it reaches the end, we
recommend you turn the Program dial to the “Refresh” position and wait until the
end of the cooling phase before removing the laundry. This will avoid a build-up of
heat inside the appliance. To do this, first turn the dial to the OFF [ O ] position, then
to “Refresh” and then press the Start/Pause button.
Loading ...
Loading ...
Loading ...