Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
12
Instructions
Control panel buttons (Fig. 4)
Heat Pump
31 5
4
92 7
8
10
11
6
1 Program dial: Turn the program dial (knob) clockwise or anticlockwise to switch on the
appliance and select the required program (see page 18 for details of the programs).
2 OFF [ O ] position: At the end of a program, turn the knob to the OFF [ O ] position to
switch the machine off.
3 Time button: Press this button to extend the drying time. The “Time” program has a
default drying time of 20 minutes, which can be extended in 10 minute steps.
4 Child lock:
– To activate the child lock after the drying cycle has started, press and hold the Time
and Dry Level buttons for several seconds. When the child lock icon lights up on
the display, all buttons and knob operations are ineffective except for the OFF [ O ]
position. (In an emergency you can still power the machine off.)
– To cancel the lock, press and hold the Time and Dry Level buttons for several seconds.
– The function will be cancelled when you open the door or take out the filter drawer
during operation, or when the water container is full and needs to be emptied.
5 Dry Level button: If the program allows, use this button to select the drying level.
6 Wi-Fi: Press and hold the Dry Level and Anti-Crease buttons at the same time to
activate (reset) the Wi-Fi module.
7 Anti-Crease button: Use this button to extend the duration of the anti-crease phase.
8 Mute buzzer: Press and hold the Anti-Crease and Delay Start buttons for three to
five seconds to mute the buzzer.
9 Delay Start: Use this button to set the delay time (from 1 to 24 hours) of the start of a
drying program.
10 Start/Pause
button: Press this button to start a drying program or to pause it.
11 Display screen: Shows the settings, time remaining, options, codes, etc. (see page 13).
Loading ...
Loading ...
Loading ...