Loading ...
Loading ...
Loading ...
Safety Tips
6/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Power supply
7. Power supply
The voltage, frequency and capacity of the
power supply shall be consistent with the
nameplate of the machine.
±10% fluctuation of rated power voltage is
allowed.
Separate circuit breakers must be installed
for the ice maker..
Warning
The power supply must be reliably
grounded, and the wiring must conform to
the national and regional laws and
regulations of the ice maker.
8.Clean after Installation
After the ice maker is installed, clean the shell,
liner and ice scoop with a clean wet cloth or
sponge;
Warning
Banana oil, oxalic acid, hydrochloric aci
d, alcoholic liquids and other corrosive det
ergents are strictly prohibited.
9.
Check after Installation
After the ice maker is installed, check
against the following information before
operation.
Does ice maker place levelly？
Have you removed all the
transportation seals？
Are all the water and electricity
connected well？
Is the supply voltage consistent with
the rated voltage on the nameplate?
Is the ice maker properly grounded?
Are there adequate air Spaces around
the ice maker?
Is the ambient temperature of the ice
maker between 10°C and 38°C?
Does the water inlet temperature
remain between 5°C and 32°C?
Are the ice maker and ice bin cleaned？
Loading ...
Loading ...
Loading ...