Loading ...
Loading ...
Loading ...
Safety Tips
5/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Water supply/Purge
6. Water supply/ Drainage
Warning
Ice makers shall be installed in
accordance with safety standards and shall
not be installed on the aisles of public
buildings.
6.1 Water supply
Depends on
local potable water quality,
determining if a water treatment system
is needed to prevent sediment
formation, filtering out impurities and
removing bleach smell .
Please install water supply pipe
according to below instruction :
Don't connect ice maker to hot
water pipe；
Water supply pressure range is
1bar～5bar. Using water pressure
regulator for water supply pressure
over rang.
Individual water faucet must be
installed for ice maker.
6.2 Purge
When installing drain pipe, follow these
guidelines to be sure all drained water
flowing into gully drain：
The main gully drain capacity shall be
enough for all drain water:
Drain pipe should be wrapped with
insulation material to prevent
condensation.
The drain pipe of the water-cool
condenser and the drain pipe of ice
bin should be placed separately
About 2.5 centimeters drop needed
for each one meter additional drain
pipe and must not be bent
Loading ...
Loading ...
Loading ...