Loading ...
Loading ...
Loading ...
Safety Tips
11/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Cleaning and Disinfection
13.4 Cleaning of condensers
It is recommended that the condenser be
cleaned every six months, following the
following steps:
Use cross screws to remove the left and right
sides of the ventilation window, remove the
ventilation window;
Pull up the filter on the ventilation window
Use nylon brush filter to remove dust;
Brush condenser fin dust with nylon brush
along the upper and lower direction;
★
important
After cleaning, please install back the
top cover plate, back plate, correct
installation cooperation.
Warning
Clean condenser, must disconnect ice
machine power supply. Condenser edge
sharp, clean carefully cut.
★
important
The dirty condenser will block the
circulation of air, cause the operating
temperature of the ice maker to be too
high, reduce the amount of ice making and
shorten the service life of the parts.
Loading ...
Loading ...
Loading ...