Loading ...
Loading ...
Loading ...
Safety Tips
9/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Check before operation
13. Routine cleaning
▲ attention
It is strictly forbidden to wash the ice
machine with water sprayer. Do not use
any alcoholic liquid to clean or disinfect the
ice maker, otherwise it may cause cracks
in plastic parts;
Remove the roof and back panel, and
should be removed by maintenance
personnel with relevant knowledge;
Do not wash plastic parts in water or
dishwasher above 40℃ temperature to
avoid damage to parts.
Environmental cleaning: often clean the ice maker
to keep the environment clean and make the
equipment run efficiently.
Shell cleaning: clean the ice machine with
sponge dipped in neutral cleaning liquid and
dry with clean soft cloth. Use stainless steel
cleaners if necessary.
Air filter cleaning: filter can filter dirt or dust in
the air to prevent condenser clogging. If the
filter is blocked, the performance of the ice
maker will decline.It is recommended that air
filters be cleaned once or twice a month:
13.1 Shell Dismantling
★
important
If necessary, it is not recommended to remove
the top cover plate, please have the relevant
knowledge or under the guidance of
professionals.
If cleaning is required, disassemble and
assemble as follows:
Remove the top cover plate of the ice
maker and have a screw behind the ice maker,
remove it with a cross screwdriver,
Lift up the top cover gently, then pull back
gently, you can pull out the top cover
Remove the back plate of the ice maker
with a cross screwdriver to remove the
upper two screws of the back plate, gently
lift the back plate up, you can remove the
back plate (note: drain pipe through the
back plate, gently pull the back plate,
place);
Loading ...
Loading ...
Loading ...