Loading ...
Loading ...
Loading ...
Safety Tips
13/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Cleaning and Disinfection
5.
Water between the tank and evaporator has
been circulating cleaning, about 30 minutes
later, the cleaning stopped, manual discharge
of water in the tank;
6. Press "[ cleaning]" key, enter the automatic
rinsing stage, the rinsing process recirculation
5 times, the whole cleaning process is over,
the screen shows "OFF", into standby state,
the whole process takes about 37 minutes;
7.
Unplug the power.
8.
Remove flow pipe, water retaining plate, take
out water pump, float ball, ice shovel (removal
method refer to parts removal / installation
process).
9. Mix 8 liters of warm water (45~50℃) and 4
packets of cleaning agent (KAY
DELIMER ,56.7g/ package) into cleaning
liquid (the amount of cleaning liquid needs to
be adjusted appropriately).
10. Soak the parts in the cleaning solution for
more than 5 minutes (if the scale is heavy, it is
recommended to soak for more than 10
minutes).
11. While soaking parts, wipe the surface of parts
in contact with water and ice with nylon brush
or soft cloth dipping cleaning liquid, such as
evaporator ice grid, ice baffle, ice storage
bucket, etc .(the dead corner can be dipped in
cleaning agent wet rag wrapped disposable
chopsticks cleaning). Rinse with clean water
(5 times).
Scrub the ice shield
Wash the refrigerator
Brush pipe mandrel Brush pump bottom
Plastic parts around brush steam
Brush evaporator
Loading ...
Loading ...
Loading ...