Loading ...
Loading ...
Loading ...
Safety Tips
4/21
Number: JT190199988 Version Number: A1
Note: Subsequent versions of this specification are subject to change without prior notice. Thank you
Water supply/Purge
3. Unpack
Before unpacking, check the anti-tilt sign is
in good condition, the outer packing of the
machine is in good condition, and the
machine model matches your purchase.
Take out accessories and affiliated
documents, check for its consistency with
packing list.
If there is any discrepancy or damage,
please contact our company/distributor
directly..
4.
Installation Location
The ice maker is not suitable for outdoor
usage, the installation location should not
be closed to heat source or be exposed
under direct sunlight.
The normal working ambient temperature
should be ranged between 10°C～38°C, the
water temperature should be between
5°C～32°C. If the ice-making machine
operates beyond the above normal
temperature range for a long time, its
ice-making capacity may be affected.
Ice makers should be placed near drinkable
water supply. It is recommended that
distance between ice makers be less than
one meter;
Do not block the ventilation window of the
ice maker. There should be enough air
convection space around the ice maker;
The ice maker can not work at sub-zero
temperatures, to prevent supply line failures,
empty the ice maker when the temperature
is below zero(see “preparation for long-term
storage of ice maker” ").
5.
Leveling Adjustment
Screw the adjustable part of the four
adjusting bottom feet to the end, and then
rotate the adjusting bottom foot into the
corresponding installation hole at the four
corners of the bottom plate of the ice
machine;
Move the ice maker to the installation
position. Use a horizontal ruler to adjust the
level of the ice maker.
Note
Do not use the method of cushioning
hard objects under the bottom foot to
adjust the level of the ice maker. To ensure
that the ice machine four feet stable
contact with the ground, to prevent
machine operation vibration.
Loading ...
Loading ...
Loading ...