Loading ...
Loading ...
Loading ...
UtilizingtheAudio-VideoOutput
ofAnotherAVComponent
Selecting External Input
When a component is connected to the video or audio
input jacks on this unit as described on pages 17 and 18.
it is possible to select the input from that unit. By doing
this, you can combine the audio of the connected
component with the video of this player or the video of
the connected component with the audio of this player,
or you can even select both the audio and video input
from the connected component(s).
Make selections in the Setup screen General menu
[External Input] setting in the "Expert" menu mode
(page 40).
The input jacks on this player can be used for external
audio and/or video input from a separate component.
Additionally, when these kind of connections are made,
it is possible to mix and match the audio and video
inputs as you like.
Make audio and!or video connections to the input jacks
on this unit as described in the previous section 'Master-
Slave Connections'.
• Select the audio or video input from the component(s)
connected to the input jacks on this unit in the Setup
screen Genera) menu [External Input] setting in the
"Expert" menu mode (pages 40 and this page).
• When Master-Slave connections are made to a
second Pioneer DV-F727 player, it is not possible to
make connections to a separate component even if
some jacks are not being used by the Slave player.
Notes
• It is not possible to select two aud_ or _o _d_ sources at
the same _me.
• If a _d_ signal is being input from an e)_er_lly connected
component and SETUP is pressed on the remote, the *_d_
signal of the player will appear while the Setup screen is open.
This is not a malfunction.
• When external input connections are made, do nor make any
connections to the MASTER-SLAVE CONTROL jacks.
Settings: Off*
Audio
Selects the audio output from the connected
component.
Video
Selects the video output from the connected
component.
Audio and Video
Selects both the audio video output from the
connected component.
• Factorysetting
Notes
• It is not possible to combine wvo video or two audio sources.
• When "Audio and Video" is selected, there is no output from
this unit.
• When Master-Slave connection is made, this setting cannot be
selected.
• The output of the connected component(s) is not input when
the power of the player is turned off.
• If a video signal is being input from an externally connected
component and SETUP is pressed on the remote, the video
signal of this unit will appear while the Setup screen is open.
This is not a rnalfuection.
68
Loading ...
Loading ...
Loading ...