Loading ...
Loading ...
Loading ...
Audio Connections
This player features two digital (opticst and coaxial) and
also analog audio output connection possibilities.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs
from both optical digital and coaxial digital output jacks.
When making digital audio connectiorm, use either
the coaxial or the optical output jack. It is not
necmmary to make oannections to both digital
output jack_
When a DVD recorded in Dolly Digital, DTS, or MPEG is
playing, noise will be output if you have made
connections via the digital audio jacks to an AV
component that cannot decode s Doily Digital, DTS, or
MPEG digital bitatream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 21). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio I menu (page 41).
DIGITAL OUT (Optical)
The digitalsignalistransmittedas lightpulsesthrougha
fiber-opticcable.
• Use a commerciallyavailablefiber-opticcableto
connectthe DIGITALOPT. OUTonthe playertothe
digitalopticalinputon anAV component.
v
ooa_
AV ampllflm"or ,
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use a commercially available coaxial cable to connect
the coaxial digital output on the player to the coaxial
digital input on an AV component.
AV eompenent
t
Analog Audio Connections:
AUDIO OUT
• Analog audio connections can be made to a stereo
amplifier or receiver, or also can be made to e "IV or
monitor with stereo input jacks.
• Use the suopliad audio cable to connect the AUDIO
OUT jacks on the player to the audio input jacks on a
stereo amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
ooO
Stereo amplifier A
or ruelver
€:)
Z
w
17
Loading ...
Loading ...
Loading ...