Loading ...
Loading ...
Loading ...
Usingthe Setup Screen Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up the player using the Setup
Navigator (page 20). If you selected "Not Used" when the
Setup Navigator appeared, you may still set up the player
using the Setup Navigator in the General menu screen.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1. Audio 2, Video, and Language menus as
described on the following pages.
2
3
4
Press SETUP.
The Setup screen appears.
{Example)
O'tSOut- Off
S41CtZF_tl O_. I_Hz _ 41kHz
k'PEG(_t - MPIEGI_PCU
Move the cursor control joystick right or left to
select the menu you want.
As each menu is selected with the cursor,the
settings appear below the menu heading.
Move the cursor control joystick down to
enter the menu.
The top item within the menu becomes highlighted.
{Example)
Note
If the Setup screen is opened during playback of a DVD being
viewed in the letter box format, the screen may switch to the
wide screen format. This isnot a malfunction, and the screen
will re;urn to normal when The Setup screen is closed.
(Cursor)
M--J
1
l
°°°©t
ooo
ooo
ooo cz_
EJ_ C_IB
I
1 Press _ (_ STANDBY/ON on the front
panel).
5 Move the cursor control joystick up or down _
to select the setting you want to change.
The options available for each setting appear to the I_
right when the setting is selected. The current
setting appears with the setting indicator lit.
2Z
96Mtz _:M Q_t- _ _-4aldtz
MpEG Out. MP_G _
6 theM°VesettingthecurSOroptions.COntroljoystick right to enter --i i
(Example) _ --I
t_
o
s aeM_ I_
D
Z
Cn
• Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP • first
before pressing SETUP.
• Operating the menu after pressing STOP • may
cancel the resume function.
• Some menu options are not immediately
effective if set while a disc isplaying. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
isstopped.
39
Loading ...
Loading ...
Loading ...