Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
237
WWW.SIGLENT.COM
History
The history function can record the waveforms of the input channels before press
the
Run/Stop button. In run state, the oscilloscope records input waveform
continually; when fill up the memory (reach the maximal frame), the new frames
will cover the old frames and keep the latest frames.
To use the History function, the HORIZONTAL Format must be set to YT.
Do the following steps to record and replay waveform:
1. Press the
History button on the front panel to enable the History function.
When in run state, the waveform will enter the stop state.
When in stop state, and then enable the History function, the oscilloscope
will keep the stop state.
Press the History button again or press the Stop button to turn off History
function.
2. Press the List softkey to turn on or off the list display. The list records the
timestamp of every frame. It is accurate to microseconds.
Figure 169 History
3. Press the Frame No. softkey; then turn the Universal Knob to select the frame to
display.
The format of the Frame is A/B; A is the frames number that displaying on
the screen and B is the maximal frame number you can set.
The maximal frame number is determined by the current sampling point
Loading ...
Loading ...
Loading ...