Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
214
WWW.SIGLENT.COM
Keyboard Test
Keyboard test is used to test that if the keys or the knobs work well.
Do the following steps to do keyboard test:
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the third page of the UTILITY function
menu.
3. Press the Do Self Test softkey to enter the SELFTEST function menu.
4. Press the Keyboard Test softkey to enter the keyboard test interface, as the
picture shown below.
Figure 139 Keyboard Test
5. To perform the knobs and the buttons test.
6. Knobs test: the default value is 0. Turn left to increase the value while turn right
to decrease; push the knob to set the value to 0. Test every knob randomly.
7. Keys test: the first time to press the key to light it up, and a second press to die
out. Test every button randomly.
8. Press the
Run/Stop button 3 times to exit the keyboard test program.
LED Test
LED test is used to test that if the button lights work well.
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the third page of the UTILITY function
Loading ...
Loading ...
Loading ...