User Manual - Page 342

For HL-L3280CDW.

Loading ...
Loading ...
Loading ...
Home > Appendix > Important Information About Toner Cartridge Life
Important Information About Toner Cartridge Life
Toner Cartridge Life
This product detects the life of the toner cartridges using the following two methods:
Detection by counting the dots of each color that are necessary to create an image
Detection by counting the rotations of the developer roller
The print operation will stop when either of the upper limits is reached. The upper limit is set above the number of
dots or rotations that would be required for the cartridge to perform consistently with its advertised page yield.
This function is intended to reduce the risk of poor print quality and damage to the machine.
There are two messages that indicate when the toner is low or needs replacing: Toner Low and Replace Toner.
Toner Low is displayed on the LCD when the number of dots or rotations of the developer roller nears its
maximum count. Replace Toner is displayed on the LCD when the number of dots or rotations of the developer
roller reaches its maximum count.
Color Correction
The number of developer roller rotations that is counted may not only be for normal operations, such as printing
and copying, but also for machine adjustments, such as Color Calibration and Color Registration.
Color Calibration (Adjustment of Color Density)
To obtain stable print quality, the density of each toner cartridge needs to be maintained at a fixed value. If the
density balance between the colors cannot be kept, the tint becomes unstable, and accurate color reproduction
becomes impossible. The toner density can change due to chemical changes to the toner that affect its electrical
charge, deterioration of the developer unit, and temperature and humidity levels in the machine. During
calibration, the density level adjustment test patterns are printed on the belt unit.
Calibration is mainly performed at the following times:
When you start the Color Correction from the control panel or the printer driver to improve the color density.
When you replace a used toner cartridge or drum unit with a new one.
When the machine detects that the ambient temperature and humidity have changed.
When a specified number of printed pages is reached.
Color Registration (Correction of Color Position)
In this machine, the drum unit and developer unit are prepared for black (K), yellow (Y), magenta (M), and cyan
(C), respectively. Four color images are combined into one image, and therefore color registration errors (for
example, how the four color images align) may occur. When registration errors occur, registration correction test
patterns are printed on the belt unit.
Registration is mainly performed at the following times:
When you start the Color Correction to clear the color registration error.
When a specified number of printed pages is reached.
Related Information
Appendix
336
Loading ...
Loading ...
Loading ...