Loading ...
Loading ...
Loading ...
References
PROBLEM POSSIBLE CAUSE SOLUTION
No sound. The system cord and/or speaker cord is not connected. Check the connection. (r_ pg. l 0 - 13)
There is a short in the speaker cord. Reconnect the speaker cord.
The audio cord is not connected to AUDIO IN (VCR) Connect the cord correctly. (r_ pg. 14)
and/or DIGITAL IN (DBS) correctly.
An incorrect source has been selected. Select the correct source. (r_ pg. 20)
Muting is on. Press MUTING to cancel muting. (r_ pg. 20)
The decode mode is not set correctly. Select the proper decode mode. (r_ pg. 22)
Sound from one front The speaker cord is not connected correctly. Connect the speaker cord correctly. (r_ pg. 10)
speaker only.
Left-right balance is not set properly. Adjust the balance properly. (r_ pg. 49, 54)
No sound from the The speaker setting is incorrect. Set the speaker setting properly. (r_ pg. 49, 54)
center and/or surround
speakers.
Bass sound is heard Appropriate bass level for stereo sound is not selected. Set "AUDIO POS" properly. (r_ pg. 54)
reinforced when
listening in stereo.
DVD Playback
PROBLEM POSSIBLE CAUSE SOLUTION
No picture is displayed The video cord is not connected correctly. Connect the cord correctly. (_ pg. 8)
on the TV screen.
Select the correct input on the TV.
Use a playable disc. (r_ pg. 3)
Change the scan mode to "INTERLACE". (r_ pg. 22)No picture is displayed
on the TV screen, the
picture is blurred, or the
picture is divided into
two parts.
A disc cannot be played.
TV input selection is incorrect.
The disc is not playable.
The scan mode is set to "PROGRESSIVE" though the
center unit is connected to the TV which does not
support the progressive video input such as a
conventional TV.
The center unit's and disc's Region Code numbers are Replace the disc. (r_ pg. 3)
incompatible.
Parental Lock is in use. Enter password to change the Parental Lock level.
(r_ pg. 51 )
A disc cannot be played The disc is loaded with its label and data sides inverted. Load the disc correctly. (r_ pg. 23)
and "0:00" is displayed
on the display window.
The unplayable disc is loaded.
Video and audio are The disc is scratched or dirty.
distorted.
A VCR is connected between the center unit and the
TV.
With some discs, a picture may be blurred when setting
"PICTURE SOURCE" to "FILM" or "AUTO".
The picture does not fit The monitor type is not set correctly.
the TV screen.
The TV is not set correctly.
No subtitle appears on
the TV screen though
you have selected a
certain language as your
initial subtitle language.
Audio language is
different from the one
you have selected as
your initial audio
language.
Replace the disc. (r_ pg. 3)
Replace or clean the disc. (r_ pg. 2)
Connect the center unit and TV directly. (r_ pg. 8)
Set "PICTURE SOURCE" to "VIDEO (NORMAL)" or
"VIDEO (ACTIVE)". (r_ pg. 49)
Set "MONITOR TYPE" properly. (r_ pg. 49)
Set the TV properly.
Some DVDs are programmed to always display no
subtitle initially. If this happens, press SUBTITLE on
the remote control after starting play. (r_ pg. 39)
Some DVDs are programmed to always use the original
language initially. If this happens, press AUDIO on the
remote control after starting play. (r_ pg. 39)
57
Loading ...
Loading ...
Loading ...