Loading ...
Loading ...
Loading ...
Getting started This page is for TH-M65
• Assemblingthesatellite speakers(TH-M65 only)
Each speaker (except the center speaker) has been divided into two
parts for shipment. Before connecting the satellite speakers, first
assemble them by following the procedure below.
3
Fix the stand to the speaker section.
• Be sure to tighten the screws firmly.
Speakersection
Stand
Screws (4)
(supplied,
M4 x 25 mm)
Speaker section Stand
Before assembling
• Prepare a Phillips screwdriver.
• Take care not to drop the stand while assembling; otherwise, it
may cause damage to the floor or injury.
• Ensure enough space exists for assembly and installation.
• Spread a large, thick cloth on the floor where you assemble the
speakers, so you can protect the floor and the speaker itself.
1 Connect the speaker connectors to the
stand connectors.
• Be sure to connect the speaker connectors by matching their
sizes.
Repeat the procedure from step 1 to assemble the other satellite
speakers.
NOTE
• Use the speaker after assembly is fully and correctly done.
• It is recommended to place a cushion under the speaker section.
You can tighten the screws easily by placing the speaker section
horizontally.
Cushion
(not supplied)
Speaker section Rear
Stand
2 Join the stand to the speaker section.
Stand
Speaker section
11
Loading ...
Loading ...
Loading ...