Loading ...
Loading ...
Loading ...
Getting started
Remote control
mode selector
DBS
VCR
TV VOL
CHANNEL +/-
<1<1--
REC --
TV RETURN
000}0
0000
0000
000_0
0000
0000
0000
- 0/I VCR/DBS
- 0/I TV
- TVNIDEO
-I_
(play button)
ENTER
- Number
buttons
For TV operations
You can operate your TV using the remote control supplied with
this system.
• Refer also to the instruction manuals supplied with your TV.
• To set the manufacturer's code
You can operate a JVC TV without setting the remote control
signal.
1 Slide the remote control mode selector
to TV.
2 Press and hold O/t TV.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
4 Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Hitachi TV: Press 1, then 0.
For a Toshiba TV:Press 0, then 8.
Manufacturer Code Manufacturer Code
JVC 01 Samsung 12
Hitachi 10 Sanyo 13
Magnavox 02 Sharp 06
Mitsubishi 03 Sony 07
Panasonic 04, 11 Toshiba 08
RCA 05 Zenith 09
,,_ Release O/I TV.
6 Try operating your TV by pressing
O/t TV.
When your TV turns on or off, you have entered the correct
code.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
NOTE
• Manufacturers' codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
• Operation
IMPORTANT
Before using the remote control to operate a
TV;
• Set the remote control mode selector to TV.
[ AUDIO_VCR/DBS ]
The following buttons are available:
©/I TV: Turns TV on and off.
TV VOL +/-: Adjusts the volume.
TV/VI DEO: Selects the input mode (either TV or
VIDEO).
CHANNEL +/-: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN: Alternates between the previously selected
channel and the current channel.
ForDBStuner or CATVconverter
operations
You can operate your DBS tuner or CATV converter using the
remote control supplied with this system.
• Refer also to the instruction manuals supplied with your DBS
tuner or CATV converter.
• To set the manufacturer'scode
1 Slide the remote control mode selector
to VCR/DBS.
2 Press and hold DBS.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
17
Loading ...
Loading ...
Loading ...