Loading ...
Loading ...
Loading ...
Getting started
4 Press number buttons (1-9, O) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product: Press 0, then 1.
For a Sony product: Press 2, then 0.
Manufacturer Code
Echostar 21
GI Jerrold 01,02, 03, 04, 05, 06, 07, 08
Hamin/Regal 15, 16, 17, 18
Pioneer 13, 14
RCA 19
Scientific Atlanta 09, 10
Sony 20
Zenith 11, 12
5 Release DBS.
6 Try operating your DBS tuner or CATV
converter by pressing 0/I VCR/DBS.
When your DBS tuner or CATV converter turns on or off, you
have entered the correct code.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
NOTE
• Manufacturers' codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
• Operation
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector to
VCR/DBS.
2 Press DBS.
TV
AUDIOQVCR/DBS
DBS
The following buttons are available:
©/I VCR/DBS: Turns DBS tuner or CATV converter on and
off.
CHANNEL +/-: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
ForVCRoperations
You can operate your VCR using the remote control supplied with
this system.
• Refer also to the instruction manuals supplied with your VCR.
• To set the manufacturer's code
1 Slide the remote control mode selector
to VCR/DBS.
2 Press and hold VCR.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
4
Press number buttons (1-9, O) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR: Press 0, then 9.
For an NEC VCR: Press 2, then 5.
Manufacturer Code Manufacturer Code
JVC 01, 02, 03 Philips 09
Emerson 11, 26 RCA 05, 06
Fisher 29 Samsung 24
Funai 10, 14, 15, 16 Sanyo 21,22,23
Gold Star 12 Sharp 27, 28
Hitachi 04 Shintom 30
Mitsubishi 13 Sony 18, 19, 20
NEC 25 Zenith 08
Panasonic 07, 17
5 Release VCR.
6 Try operating your VCR by pressing
O/t VCR/DBS.
When your VCR turns on or ofT, you have entered the correct
code.
If there is more than one cord listed for your brand, try each
one until you enter the correct one.
NOTE
• Manufacturers' codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
• Operation
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector to
VCR/DBS.
2 Press VCR.
'T'V
i
AUDIO(_)VCR/DBS
G
VCR
The following buttons are available:
©11 VCR/DBS: Turns VCR on and off.
(play button): Starts playback.
• : Stops operation.
II : Pauses playback.
: Fast forwards video tape.
: Rewinds video tape.
REC: Press this button together with _ (play button) to
start recording or together with I| to pause
recording.
CHANNEL +/-: Changes the TV channels on the VCR.
NOTE
When operating a VCR or DBS tuner/CATV converter;
• The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR or DBS after setting the remote control mode selector.
18
Loading ...
Loading ...
Loading ...