Loading ...
Loading ...
Loading ...
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source.
_%,._
We recommend selting the input mode Io AUTO in most cases.
f
!!!!!>!ill!ii
Press one of the input selector buttons on
the remote control to select the desired input
source.
"-:5.
Press INPUTMODE on the remote control
repeatedly to toggle between input modes.
INPUTMODE
• AUTO
Automatically selects andio input signals in the follovdng
priority order:
1) Dolby Digital or DTS
2) PCM
3) Analog
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability during playback.
Use this input mode when playing back CDs or LDs
encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
• When the input mode is set to AUTO. this unit automatically
plays back multi-chamml sources n the selected input mode.
• ANALOG cannot be selected as an input mode if analog signals
are not being input from the selected input source.
You can adjust the default input mode to be selected when the
power of this trait is turned on (see page 72).
Lr_ ":iUTO ...... ":iUTQ _ ":iUTI3
T,'..,[:'T.!,7, _:: .,'.3T.'3 [: T.'3
!"_t;#,L,,::,G
When TV or STB When DVD is When AUX is
is selected as selected as the selected as the
the input source input source input source
• The input mode of VCR is fixed to ANALOG. However. if the
TV OPTICAL IN jack of this unit is assigned to VCR. AUTO.
DTS and ANALOG become m ailable as the input mode of
VCR (see page 71).
• ANALOG is not available as the input mode of DVD and AUX.
81
Loading ...
Loading ...
Loading ...