Loading ...
Loading ...
Loading ...
The control area and the corresponding functions of the
remote control change depending on the currently selected
input source. Press the input selector buttons (TV, STB,
VCR, DVD or AUX) to select an input source and switch
to the operation mode of the corresponding input source.
Press YSP to switch to the operation mode of this unit.
The buttons on the remote control numbered @ to @ are
operational only after you press YSP to switch to the
operation mode of this unit.
"4_':
You can control other componeuts by setting the appropriate
remote control codes (see page 82). Once the remote control code
for each input source (TV, STB, VCR, DVD or AUX) is set, see
"Controlling other components" on p:_ge 83 %r further
information on the specific functions of the :wailable remote
control buttons lor each input source. Note that the buttons on the
rmnote control numbered @ to _{ h:_xe diltcrent Rmctions
depending on the currently selected input source.
1 Press STANDBY/ON on the front panel or on
the remote control to turn on the power of
this unit.
or
S
Front panel Remote control
1 Input selector buttons
2 YSP
3 Beam mode buttons
4 Sound field program buttons
5 Cursor buttons _ / _ / _/_>, ENTER
6 VOL MODE
7 SURROUND
8 MENU
9 RETURN
2 Press STANDBY/ON on the front panel or on
the remote control again to set this unit to
the standby mode.
Note
When the unit is in the standby mode, only STANDBY/ON on the
l?ont panel or on the remote control is operational, and the other
control buttons oil the frout panel or oil the remote control are uot
operational until the power of this unit is turned on.
23
Loading ...
Loading ...
Loading ...