Loading ...
Loading ...
Loading ...
34
CLEANING THE RAIN COLLECTOR
1. Unscrew the funnel lid to the unlock position.
Rotate the rain collector by 30° anticlockwise.
lean
N
N
“Unlock” Position“Lock” Position
N
Only use attachments / accessories specied by the manufacturer.
Placement of this product on certain types of wood may result in damage to its nishing
CLEANING THE HYGRO-THERMO SENSOR
2. Gently remove the funnel lid of the rain collector.
3. Clean and remove any debris or insects in the funnel.
4. Wait until the parts are fully dry, and then reinstall them, and return the funnel lid on the rain
collector to a locked position.
1. Unscrew the two (2) screws at the bottom of the sensor casing.
2. Gently pull out the shield.
3. Carefully remove any dirt or insects inside the sensor casing, making sure the inside sensors remain dry.
4. Clean the shield with water and remove any dirt or insects.
5. Once the parts are fully clean and dry, reinstall them and replace the screws.
BATTERY REPLACEMENT
If the low battery indicator icon is displayed in the outdoor temperature and humidity section or
the corresponding CH section of the LCD console display, this indicates that the batteries in your
wireless weather sensor(s) are running low and should be replaced. Make sure to replace all batteries
at the same time.
CARE AND MAINTENANCE
” is displayed
outdoor 7-IN-1 sensor and current channel
NOTE: The battery life of the outdoor weather sensor lasts about two (2) years. And will run even
longer with the built-in solar panel.
Loading ...
Loading ...
Loading ...