Loading ...
Loading ...
Loading ...
22
The display console is designed to synchronize with the internet time server to obtain the local time, but
if you want to use it without connecting to your home wireless network, you can set the time manually.
During initial setup, you will need to press and hold the WI-FI/SENSOR button for six (6) seconds, then
let the display console return to normal mode. This will put it into oine mode for you to use it.
1. In normal operating mode while oine, press and hold the CLOCK button for two (2) seconds to
enter the clock setting menu.
2. Press the UP or DOWN buttons to adjust the time zone.
3. Press the CLOCK button again to make adjustments to the next setting.
4. Settings will cycle through the following options: Time Zone > DST ON/OFF > Hour > Minute >
12/24-hour Format > Year > Month > Day > M-D/D-M Format > Time Sync ON/OFF > Language.
5. Press the CLOCK button one nal time after adjusting all settings options to save and exit, or the
console will automatically save and exit the menu after 60 seconds of idle time.
NOTES: In normal operating mode, press the CLOCK button once to switch between date and year
display.
4. Click the corresponding Upload button to transfer the updated le to the console.
5. The le will install automatically once it is uploaded. You can view update progress on the display
console in the wind direction section (the number displayed will correspond to the percentage
completed, so 50 = 50% and so on).
6. The console will restart once the update completes.
NOTES: You cannot update the Function Firmware and Wi-Fi Firmware at the same time. Updates
must be installed one by one.
Make sure the power cable remains connected during the update process.
Make sure your PC’s wireless connection is stable.
Once the update process starts, do not try to do anything else on your PC or on the display
console.
During the rmware update process, the console will stop uploading data temporarily. It will
reconnect to your router and resume uploading data once the update is complete. If the console
cannot connect to your router, you may need to set up the Wi-Fi connection again, following the
steps on page 14.
Once your rmware update is complete, you may need to input your Weather Underground ID and
password again on the SETUP tab of the wireless interface.
OPERATING INSTRUCTIONS
OTHER CONSOLE SETTINGS AND FUNCTIONS
CLOCK
Manually Setting the Time
Loading ...
Loading ...
Loading ...