Loading ...
Loading ...
Loading ...
26
1. While in normal operating mode, press and hold the WIND button for two seconds to enter the
wind speed unit setting mode. The unit display will start ashing. Press the or buttons
to cycle through the wind speed units in the following order: m/s > km/h > knots > mph
Real time wind
direction indicator
Past wind
directions indicator
of last 5 minutes
Average / gust
wind speed
Set Wind Speed Units
The console display signal strength for the wireless 5-IN-1 sensor, as per table below:
If the signal has discontinued and does not recover within 15 minutes, the signal icon will
disappear. The temperature and humidity will display “Er” for the corresponding channel.
If the signal does not recover within 48 hours, the “Er” display will become permanent. You
need to replace the batteries and then press key to pair up the sensor
This console is capable to pair with a wireless 5-IN-1 sensor and up to 7 wireless thermal-hygro
sensors. If you have 2 or more sensors, you can press key to switch between
different wireless channels in normal mode, or press and hold key for 2 seconds
to toggle auto-cycle mode to display the connected channels at 4 seconds interval.
During auto-cycle mode, press key to stop auto cycle and display the current
AND DIRECTION SECTION OVERVIEW
Past wind
directions indicator
of last 5 minutes
Real time wind
direction indicator
Average / gust
wind speed
In normal mode, press and hold key for 2 seconds to enter into wind speed unit
mode and the unit will ash. Press key to change the wind speed unit in this
sequence: m/s → km/h → → mph
key again to return to normal mode.
In normal mode, press key to switch between and wind speed.
At the WEATHER INDEX section, you can press key to view the weather index in this
sequence: FEELS LIKE → HEAT INDEX → WIND CHILL → DEWPOINT.
The feels like temperature index determine how the outdoor temperature that people actually
Selecting Wind Display Mode
Beaufort Scale Chart
While in normal operating mode, press the WIND button to switch between the average wind speed
measurement and gust wind speed measurement.
While in normal operating mode, press the WIND button to switch between the average wind speed
measurement and gust wind speed measurement.
2. Press the WIND button again to return to normal display mode.
3. Press the WIND button while in normal operating mode to switch between AVERAGE and GUST
wind speeds.
Press the °C/°F button to switch between Celsius and Fahrenheit temperature measurements. The
arrows show the trend in changes to the temperature/humidity levels.
WIND
Wind Callouts
NOTE: Comfort indicator levels may vary even when the temperature is the same due to
variances in relative humidity levels. No comfort indicator will be displayed if the temperature
falls below 32 °F (0 °C) or over 140 °F (60 °C).
Loading ...
Loading ...
Loading ...