Loading ...
Loading ...
Loading ...
14
When you rst power up the console, or press and hold the WI-FI/SENSOR button for six (6) seconds,
the console LCD display will show the letters “AP” and an icon to signify that it has entered Access
Point (AP) mode. At this time it will be ready for the Wi-Fi settings to be adjusted.
Use your smartphone, tablet, or computer to connect to the console via Wi-Fi by following these steps:
1. On PC, open your Wi-Fi network settings. On Android™ or iOS devices, go to settings menu and
then select Connections/WI-FI to open the network settings.
2. Locate the display console’s SSID from the list. It should appear as PWS-XXXXXX (where all the X’s
are integers) in the list. Tap on the SSID to connect. This step will take several seconds.
3. Once you are connected to the display console, open up your internet or mobile web browser, and
enter the following address into the address bar: http://192.168.1.1 (make sure to include the
http:// or else the web browser may interpret the address as a search query). We recommend using
the latest version of reputable web browsers.
The following icons on the LCD display screen show the Wi-Fi status:
Once you are connected via Wi-Fi to the display console and have opened the settings page at
http://192.168.1.1, enter the following information into the web interface setup page. If you have chosen
not to use Weather Underground or Weathercloud’s servers, leave the check boxes unchecked.
SETUP INSTRUCTIONS
SETTING UP WI-FI CONNECTION
WI-FI CONNECTION STATUS
SETTING UP WEATHER SERVER CONNECTION
Select the Wi-fi router (SSID) you will connect to
Manually enter the SSID if not on the list
Select router’s security type (usually WAP2)
Check to confirm upload to Weather Underground
Enter new Station ID and Station key assigned
by Wunderground (Weather Underground)
Check to confirm upload to Weathercloud
Select time server
Press to complete the setting
Router’s password (leave blank if unsecured)
Press to allow add
router manually
Password record remark
(If you entered password)
Current ID and
key recorded (if any)
Current ID and key
recorded (if any)
Enter new Station ID and Station key
assigned by Weathercloud
Solid: the display console is
connected to your wireless router
Flashing: the display console is
attempting to connect to your wireless router
Flashing: the display console is
currently in AP (access point) mode
Press “SETUP” icon
to SETUP page
Below is the WI-FI icon status on the console LCD:
Flashing: Console is trying to
connect to WI-FI router
Loading ...
Loading ...
Loading ...