Loading ...
Loading ...
Loading ...
21
VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND
To view your weather station data live via PC or mobile web browser, visit http://www.wunderground.
com, and then enter the Station ID you were provided during account setup in the search box. Your
weather data will show up on the next page. Alternately, you can log in to your Weather Underground
account to view and download the recorded data from your weather station.
You can also check the Weather Underground website to learn more about their mobile app for
Android™ and iOS.
VIEW YOUR WEATHER DATA IN WEATHERCLOUD
1. To view your weather station data live via PC or mobile web browser, visit http://www.
weathercloud.net and sign into the account you created.
2. Click on the tab at the top of the page titled Devices.
3. Click on the Settings menu at the top right of the page, and select the option View.
4. Click on either Current, Wind, Evolution, or Inside to view your weather station’s data.
UPDATING THE FIRMWARE
This display console supports OTA (over the air) Function Firmware and WI-FI System Firmware updates
via any web browser (not mobile browser) on a PC that is connected to Wi-Fi. The update function for
both types of updates can be found at the bottom of the Advanced Tab on the wireless settings interface
(see Advanced Settings via Web Interface).
Follow the steps below to update your device’s Function or Wi-Fi System Firmware
1. Download the latest version of the rmware (Function or Wi-Fi) and save it to your PC. Remember
where you saved the le.
2. Press and hold the WI-FI/SENSOR button for six (6) seconds to put the display console into AP
mode, then connect the PC to the console (refer to steps in Setting Up Wi-Fi Connection on page 14.
3. Click the button that says Browse next to the appropriate type of update that you downloaded and
navigate to the location where you saved the le.
Jot down your ID and key for the further setup step.
When you rst power up the console, or press and hold the
seconds in normal mode, the console LCD will show "AP" and "
entered AP (access point) mode, and is ready for WI-FI settings.
Use the smart phone, tablet, or computer to connect to the console through WI-FI.
In PC choose WiFi network settings or In Android / iOS choose setting →
console’s SSID: in the list and it will need several second to connect.
PC WI-FI network interface Android WI-FI network interface
Once connected, enter the following IP address into your internet browser’s address bar, to
access the console’s web interface:
http://192.168.1.1
Some browsers will treat as a search, so make sure you include header.
Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or
Opera.
Loading ...
Loading ...
Loading ...