Loading ...
Loading ...
Loading ...
The oven door must be closed and all controls set correctly
for the cycle to work properly.
HOW TO DELAY THE START OF
CLEANING
Make sure the clock shows the correct time of day.
, TouchtheSELFCLEA.pad
2. Using the number pads, enter the
desired clean time.
3. Touch the DELAY START pad. The
earliest start time you can set will
appear in the display.
4. Using the number pads, enter the
time of day you want the clean
cycle to start.
5. Touch the START pad.
The door locks automatically. The display will show the start
time. It will not be possible to open the oven door until the
temperature drops below the lock temperature and the
LOCKED DOOR light goes off.
The oven shuts off automatically when the clean cycle is
complete.
6. When the LOCKED DOOR light is
off, the door will unlock
automatically.
•The words LOCK DOOR will flash and the oven control
will signal if you set the clean cycle and forget to close the
oven door.
• To stop a clean cycle, touch the CLEAR/OFF pad. When
the LOCKED DOOR light goes off indicating the oven has
cooled below the locking temperature, and open the door.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled
scouring pad and rinse thoroughly with a vinegar and water
mixture.
These deposits are usually a salt residue that cannot be
removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the
cycle.
• You cannot set the oven for cooking until the oven is cool
enough for the door to unlock.
• While the oven is self-cleaning, you can touch the CLOCK
pad to display the time of day. To return to the clean
countdown, touch the COOK TIME pad.
• If the shelves become hard to slide, apply a small amount
of vegetable oil or cooking oil to a paper towel and wipe
the edges of the oven shelves with the paper towel.
ii!i..............................
- 31 -
Loading ...
Loading ...
Loading ...