Loading ...
Loading ...
Loading ...
SPECIAL FEATURES OF YOUR
OVEN CONTROL
Your new touch pad control hasadditional features that you may
choose to use. The following are the features and how you may
activate them.
The special feature modes can only be activated while the
display is showing the time of day. They remain inthe control's
memory until the steps are repeated.
When the display shows your choice, touch the STARTpad. The
specialfeatures will remain in memory after a power failure.
;i!i!i!i;;I
'_ _,i!i! iiiiiiiiiiiiiiiiiiiiiiiiiii
II_'C!!!i
12 Hour Shut-Off
With this feature, should you forget and leave the oven on,
the control will automatically turn off the oven after 12
hours during baking functions or after 3 hours during a
broil function.
If you wish to turn OFF this feature, follow the steps below.
1. Touch the BAKE and BROIL HI/LO
and pads at the same time for 3
seconds until the display shows
SF.
2. Touch the DELAY START pad. The
display will show 12 shdn (12 hour
shut-off). Touch the DELAY
START pad again and the display
will show no shdn (no shut-off).
3. Touch the START pad to activate
the no shut-off and leave the
control set in this special features
mode.
Fahrenheit or Celsius Temperature
Selection
Your oven control is set to use the Fahrenheit temperature
selections but you may change this to use the Celsius
selections.
and
and
X2
1. Touch the BAKE and BROIL HI/LO
pads at the same time for 3
seconds until the display shows
SF.
2. Touch the BROIL HI/LO and
COOK TIME pads at the same
time. The display will show F
(Fahrenheit).
3. Touch the BROIL HI/LO and
COOK TIME pads again at the
same time. The display will show
C (Celsius).
4. Touch the START pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound
followed by one beep every 6 seconds until the
CLEAR/OFF pad is touched. This continual 6-second beep
may be canceled.
To cancel the 6-second beep:
and
1. Touch the BAKE and BROIL HI/LO
pads at the same time for 3
seconds until the display shows
SF.
2. Touch the TIMER ON/OFF pad.
The display shows CON BEEP
(continual beep) and BEEP. Touch
the TIMER ON/OFF pad again,
The display shows BEEP. (This
cancels the one beep every 6
seconds.)
3. Touch the START pad.
- 24 -
Loading ...
Loading ...
Loading ...