Loading ...
Loading ...
Loading ...
SPECIAL FEATURES OF YOUR
OVEN CONTROL
Control Lockout
Your control will allow you to lock out the touch pads so
they cannot be activated when touched or cleaning the glass
panel.
To lock the controN:
1. Touch the 9and 0touch pads at
the same time for 3 seconds until
the control beeps twice. The
display will show LOC
continuously and the time of day if
not blacked out.
_l!l'l!: All cooking and timing functions will be cancelled
when locking out the control.
2. To unlock the control, touch the 9
and 0touch pads at the same time
for 3 seconds until the control
beeps twice, and LOC will be
removed from the display.
12-Hour, 24-Hour or Clock
Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military time clock or
black out the clock display, follow the steps below.
and Touch the BAKE and BROIL HI/LO
pads at the same time for 3
seconds until the display shows
SF.
Cook and Hold
Your new control has a cook and hold feature that keeps
cooked foods warm for up to 3 hours after the cooking
function is finished.
This feature can only be used when timed cooking.
To activate this feature, follow the steps below.
and
1. Touch the BAKE and BROIL HI/LO
pads at the same time for 3
seconds until the display shows
SF.
2. Touch the COOK TIME pad. The
display will show Hid OFF. Touch
the COOK TIME pad again to
activate the feature. The display
will show Hid ON.
3. Touch the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
iii
iii
ii!i..............................
,Touch the CLOCK pad once.
The display will show 12 hr. If this
is the choice you want, touch the
START pad.
Touch the CLOCK pad again to change to the 24-hour
military time clock. The display will show 24 hi'. If this is
the choice you want, touch the START pad.
Touch the CLOCK pad again to black out the clo& display.
The display will show OFF. If this is the choice you want,
touch the START pad.
_ffl'li: If the clock is in the black-out mode, you will not be
able to use the Delay Start function.
- 25 -
Loading ...
Loading ...
Loading ...