Loading ...
Loading ...
Loading ...
920-087-04 (8-05)
MODELNUMBER DESCRIPTION PHOTO
PXSE
PDXDA
PDXDE
PXDL
PDXFT
PXCJ
PXPC
15/2o/3o
SLEEVE EXTENSION RETROFIT KIT Zinc coated steel,
2.4" sleeve extension attached to the room side of the
sleeve to allow for the installation of a P-Series Friedrich
PTAC in a T-Series sleeve.
LATERAL DUCTADAPTER Attaches tothe PTAC/PTHP
unitand provides a transition to direct up to 35% of the total
CFM toa secondary room, either left or right ofthe unit. Kit
includesduct plenumwithdischarge grilleand internalbaffle,
adapter and end cap.
LATERAL DUCT EXTENSION A three foot insulated
plenum that attaches to the left or right side of the duct
adapter. The extension can be cut to length bythe installer.
Maximum allowable straight extension is fifteen feet.
CONTROL DOOR LOCK KIT Locks control door to
prevent tampering by unauthorized users
REPLACEMENT FILTER PACK These are original
equipment return air filters. They are reusable and can be
cleanedbyvacuuming,washing,or blowingout,andaresold
in convenient ten packs. (Two filters per chassis)
CONDUIT KITWITH JUNCTION BOX Hardwire conduitkit
with junction boxfor208/230V and 265V units(subbase not
required). Kitincludesa meansofquickdisconnectforeasy
removal ofthe chassis. *Required for 265V installations.
POWERCORDRETROFITReplacesLCDtpowercordon 230V
modelswhenunitisusedwith a subbase.PXPC15isusedwith
15 amp 2.5 kWunits. PXPC20isusedwith 20 amp 3.4 kW
units.PXPC30is usedwith 30 amp5.0 kWunits.
PXSE
PDXDA
PXDL
PDXFT
PXCJ
PXPC30
DESIGNATOR DESCRIPTION
S STANDARD UNIT Standard PTAC/PTHP chassis. Can be 230/208V or 265V, electric or heat pump.
SEACOAST PROTECTION Additional protection for PTAC/PTHP units in a coastal or corrosive
C environment. The entire outdoor coil is submerged in a speciallyformulated enamel coating, then oven-
curedfor a tough, corrosion-resistantfinish.
26
Loading ...
Loading ...