Loading ...
Loading ...
Loading ...
920-087-04 (8-05)
InstallationInstructionsModel PXGAStandardGrille
1. Removethe center support and weatherboard ifstill installed
in the sleeve.
2. Insert six plastic grommets into the grille openings from the
outside of the grille as shown in Figure 9.
3. Insert two #8 x 3/8" sheet metal screws (provided) in the top
two outside edge plasticgrommets,and tighten them halfway
intothe grommets.
4. CAUTION: Bodily injury can be caused bygrillesfalling from
a building during installation. It is recommended that a safety
line be attached to the grille and an anchor point inside the
buildina durina installation.
5. Grasp the grille by the attached plastic handles. Position
itwith the condensate drain knockouts facingdown. From
inside the building, maneuver the grille through the wall
sleeve and pull toward you until the screw heads are
inserted intothe keyhole slotsat the top of the wall sleeve.
Tighten the two screws completely.
6. Insert the remaining screws into the remaining holes and
tighten securely.
Figure9
Standard Grille
Wall sleeve
-- Weatherboard
-- Center support
Quantity Description
1 Stamped Aluminum Grille
6 Plastic Grommets
6 #8 x 3/8"Sheet Metal Screws
!
Plastichandles Plastic
grommets
12
Loading ...
Loading ...
Loading ...