Loading ...
Loading ...
Loading ...
28
AFTER USING, THE STEAM FUNCTIONS OR SELF-CLEAN
• Always remove any excess water or moisture from the oven walls and racks using kitchen
paper or cloth after using any steam functions or self-clean.
• Leave the door in the ajar position to allow oven to air dry for a period.
• Ensure there is no moisture under the crumb tray. Remove the crumb tray when steaming
or using self-clean.
• Remove and empty the slide-out drip tray at the base of the oven after each use.
• We recommended emptying the water reservoir after each use.
• Replace with fresh water each time you need to use a steam function.
• When the drip tray is removed and emptied, it is also recommended to regularly unscrew
the black drip cover located underneath the oven where the drip tray sits and clean it with
water and dishwashing liquid.
• Altough tap water is ne, the use of ltered water in the water reservoir is preferred to
reduce scale buildup.
WATER SHORTAGE
If the water tank is short of water, "ADD WATER" will display in the control panel, and the
oven will continue to emit a prompt sound, at which point the machine will stop working.
At this point, please add water to the water tank. After adding water, press START / STOP,
and the oven will resume operation.
DESCALE
‘DESCALE 0:32’ will appear and ash with in the control panel display with a beeping sound
after 50 hours of steaming. When this appears you will need to decalcify the oven for the
display to stop ashing.
1. Fill the water tank with water and add an appropriate amount of distilled white vinegar to
the water reservoir. The ratio should be 1 cup vinegar to 1 cup water.
2. Press the Steam Clean function and the oven will automatically start the descaling
program.
3. After around 20 minutes when the rst stage of descaling is complete ‘Descale 0:12’ will
ashing with continuous beeping to alarm user to remove the water tank, rinse and add
clean fresh water.
4. Press ‘start/stop’ after adding fresh clean water to the tank to continue the process.
5. Once the process is complete, the oven will enter Standby Mode. Descaling program is
completed.
6. Remove the water tank and rinse out with fresh clean water.
7. Re-ll half the water reservoir with ltered water, install it back into the machine, select the
Steam function, and run for 30 minutes to remove residual vinegar from the oven.
8. Finally, use a clean cloth to dry the remaining water inside the oven.
Loading ...
Loading ...
Loading ...