Loading ...
Loading ...
Loading ...
12
CHANGING THE OVEN LIGHT BULB
WARNING: Always unplug the oven and allow to cool before replacing the bulb. Use only a
G9 type 220~240V 25W halogen bulb.
The light is positioned at the rear of the oven cavity on the right hand side, however access
to the light bulb is outside of the oven on the back wall.
As you look at the back of the oven, the removable back panel is located on the far left hand side.
The removable panel should be printed with “Lightbulb access” so that you can easily identify it.
To remove the panel, use a Phillips head screwdriver and turn
the screw anti-clockwise until loose. Once the panel has been
removed, you will see the lightbulb inside. To remove the light,
place your ngers on the outside of the light housing and gently
pull towards you.
To insert the new bulb, line up the bulb with the socket and push
into the socket gently.
To replace the removable panel, line the screw up with the hole
and use a Phillips head screwdriver to turn clockwise until the
panel is secured.
COOKING FUNCTIONS
STEAM
Suggested rack placement: position 1 or 2. Remove crumb tray.
When using this mode, please ensure that the water in the water tank is sufcient.
From standby mode:
1. Select Steam on the touch control panel. The Steam function will be solid at 100%
brightness. The default temperature for super steam is 100°C, and default time is 30
minutes, with an adjustable temperature range of 40-100°C and an adjustable time range
of 1-60 minutes.
2. Rotate the selector dial to adjust the cooking temperature and press to conrm.
3. Rotate the selector dial again to adjust the cooking time and press START / STOP to
start steaming.
There is no preheating of the oven required on the steam function - food should be placed in
oven before selecting cooking function and pressing START, as preheat time is minimal and
incorporated into overall cooking time.
To PAUSE cooking press START / STOP. To RESUME cooking press START / STOP again.
The timer display will countdown while cooking is in progress so that you are aware of the
cooking time remaining. When the program is nished, the oven will BEEP 3 times to indicate
that the program is complete. The oven will then automatically return to standby mode.
IMPORTANT: Remove drip tray and empty before using this function.
Loading ...
Loading ...
Loading ...