Loading ...
Loading ...
Loading ...
28
22
COMPOUND CUT (FIG. 22)
A compound cut is the combination of a miter
and a bevel cut simultaneously.
● Loosen the miter handle (E). Lift up the
positive stop locking lever (W) and position
the table at the desired angle. Release the
positive stop locking lever (W) and lock the
miter handle (E).
● Loosen the bevel lock handle (Q) and
position the cutting head at the desired bevel
position. Lock the bevel lock handle (Q).
● Turn the LED switch on and position the
workpiece on the table for pre-alignment of
your cut.
CUTTING BOWED MATERIAL (FIG. 23)
A bowed workpiece must be positioned against
the fence and secured with a clamp (B) before
cutting as shown. Do not position workpiece
incorrectly or try to cut the workpiece without the
support of the fence. This will cause the blade to
bind and could result in personal injury.
WORKPIECE SUPPORT (FIG. 24)
Long pieces need extra support. The support
should be placed under the workpiece. Keep
your hand holding the workpiece positioned
6-11/32 in. or more away from the blade. The
support must let the workpiece lay at on the
worktable during the cutting operation.
NOTE: When mounted on a at surface, the saw
table is 2-11/16 in. high.
23
24
E
B
2-11/16 in.
Q
W
Loading ...
Loading ...
Loading ...