Loading ...
Loading ...
Loading ...
26
19
BASIC SAW OPERATIONS
TURNING THE LED LIGHT ON (FIG. 19)
Press the LED ON/OFF switch (S) to “ON”
position to turn the light on.
Do not stare into the light beam (not even from a
distance). Staring into the light beam may result
in serious injury or vision loss.
The LED casts a shadow of the blade teeth onto
the workpiece for making precision cuts and
predicts blade kerf for blade cut line.
To use this feature, turn the LED ON/OFF
switch (S) on. Bring the cutting head down, and
the shadow of the blade will be projected onto
the workpiece, indicating where the blade teeth
will make contact as the cut is made.
TURNING THE SAW ON (FIG. 19)
This miter saw is equipped with a two step
ON/OFF trigger switch. Press down on the
yellow safety lock switch (1) and squeeze the
trigger switch (2) to turn the miter saw ON.
NOTE: Make the ON/OFF switch childproof.
Insert a padlock (not included) through the
hole (3) in the trigger switch, locking the tool’s
switch and preventing children and other
unauthorized users from turning the machine on.
When the trigger switch is released, the blade will
be stopped within 10 seconds.
● To avoid injury, after completing a cut and
releasing the trigger switch, wait and conrm
the blade has stopped before raising the
cutting head.
● To avoid injury, check and tighten the arbor
bolt periodically.
BEFORE LEAVING THE SAW
● Never leave tool running unattended. Turn
power OFF. Wait for all moving parts to stop.
● Make workshop childproof. Lock the shop.
Disconnect master switches. Store tool away
from children and other unqualied users.
WARNING: To avoid injury from materials
being thrown, always unplug the saw to
avoid accidental starting and remove small
pieces of material from the table cavity.
WARNING
1
3
2
WARNING
S
Loading ...
Loading ...
Loading ...