Loading ...
Loading ...
Loading ...
27
20
21
MITER CUT (FIG. 20)
● When a miter cut is required, unlock the
miter table by turning the miter handle (E)
counterclockwise.
● While holding the miter handle, lift up on the
positive stop locking lever (W).
● Rotate the miter table to the right or left with
the miter handle.
● When the table is in the desired position, as
shown on the miter scale (1), release the
positive stop locking lever and tighten the
miter handle. The table is now locked at the
desired angle. Positive stops are provided at
0°, 15°, 22.5°, 31.6° and 45°.
● Turn the LED switch on and position the
workpiece on the table for pre-alignment of
your cut.
IMPORTANT: Always tighten the miter table
lock handle before performing every cutting
operation.
BEVEL CUT (FIG. 21)
● When a bevel cut is required, loosen the
bevel lock handle (Q) by turning it clockwise.
● Tilt the cutting head to the desired angle, as
shown on the bevel scale (U).
● The blade can be positioned at any angle,
from a 90° straight cut (0° on the scale) to
a 45° left bevel. Tighten the bevel lock
handle (Q) to lock the cutting head in
position. Positive stops are provided at 0°
and 45°.
● Turn the LED switch on and position the
workpiece on the table for pre-alignment of
your cut.
E
1
W
Q
U
Loading ...
Loading ...
Loading ...