Loading ...
Loading ...
Loading ...
15
4
3
INSTALLING THE HOLD-DOWN CLAMP (FIG. 3)
NOTE: There are two mounting holes for the
hold-down clamp. These are located just behind
the fence on the left and right side of the base.
● Loosen the lock knob behind the fence.
● Place the hold-down clamp (B) in the desired
mounting hole.
● Tighten the lock knob to hold the hold-down
clamp.
NOTE: Place the clamp on the opposite side
of the base when beveling. ALWAYS MAKE
DRY RUNS (UNPOWERED) BEFORE FINISH
CUTS TO CHECK THE PATH OF THE BLADE.
ENSURE THE CLAMP DOES NOT INTERFERE
WITH THE ACTION OF THE SAW OR GUARDS.
BLADE WRENCH (FIG. 4)
For convenient storage and prevention of loss,
there is a holder in the rear of the right side
fence for storing the blade wrench (D) when not
in use. Place the provided wrench in this location.
D
B
Lock
knob
Mounting holes
Loading ...
Loading ...
Loading ...